Xian Ruijia Measurement Instruments Co., Ltd.
Xian Ruijia Measurement Instruments Co., Ltd.
Add to Cart
Tension and compression load cells have capacity range from 1kg, 2kg, 3kg, 10kg to 50kg. Load cell capacity can be customized according to customer requirements. It is able to measure both tensile and compressive forces, and it offers good hardenability and strong resistance to mechanical fatigue, quite durable for heavy-duty use.
After purchasing one RJ load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.
Specification:
| Model | RJ-LCS-DYLY-106 |
| Weight | 0.06kg |
| Capacity range * | 0kg~50kg |
| Matched Display Controller | RJ |
| Accuracy | 0.05%F.S (linearity + hysteresis + repeatability) |
| Sensitivity | 2.0±0.05mV/V (Low range variations may differ) |
| Frequency response | 8 kHz |
| Creep | ±0.03%F.S/30min |
| Zero output | ±1%F.S |
| Temperature effect on zero | ±0.03%F.S/10℃ |
| Temperature effect on output | ±0.03%F.S/10℃ |
| Operating temperature | -20℃~+80℃ |
| Input impedance | 350±20Ω |
| Output impedance | 350±5Ω |
| Insulation resistance | ≥5000MΩ |
| Safety overload | 150%F.S |
| Bridge voltage (excitation voltage) | DC 5-15V, suggest DC 10V |
| Material | Alloy steel |
| Protection class | IP67 |
| Cable length | 2m |
| Wiring | EXC+: Red, EXC-: Black, SIG+: Green, SIG-: White |
Dimension (unit: mm):
Note: Length of M6 screw is 6mm.
Tips: How to judge lead wire of load cell?
The output resistance of the load cell is generally 350Ω, 480Ω, 700Ω, 1000Ω. The input terminal will be conducted with temperature and sensitivity compensations. Therefore, the resistance of the input terminal will be 20~100Ω higher than that of the output terminal. Therefore, if the multimeter is used to measure the resistance value, the input and output terminals can be judged. Normally, the colors of the input and output terminals are red, black, green and white. They are respectively marked as EXC+, EXC-, SIG+ and SIG-.
Company Information